Used Doosan Puma 300C CNC Turning Center for Sale. This Doosan Puma 300C has minimal cutting hours and is in almost new condition.
Doosan Puma 300C CNC Turning Center
MX$0.00
- USD: $0.00
Out of stock
Out of stock
Description
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| SKU: | 2064 |
| Make: | Doosan |
| Model: | Puma 300C |
| Serial: | PM301912 |
| Year: | 2005 |
| Cutting Hours: | 5681 |
| Condition: | Very Good |
| Equipped With: |
|---|
| Fanuc 21i-TB CNC Control |
| 12″ Kitagawa Big Bore Hydraulic Chuck |
| 4.5″ Bore A2-11 Spindle |
| Tool Presetter |
| Programmable Hydraulic Tailstock |
| PCMCIA Card Interface |
| 12 Station Automatic Turret |
| Foot Switch |
| Oil Skimmer |
| Coolant System with pump |
| Chip Conveyor |
| Specifications: |
|---|
| Max Turning Diameter: 15.7″ |
| Max Turning Length: 24.8″ |
| Max Bar Capacity: 4.05″ |
| Swing Over Bed: 22.4″ |
| Swing Over Carriage: 17.7″ |
| Distance Between Centers: 32.0” |
| Travel: |
|---|
| X Axis Travel: 11.1″ |
| Z Axis Travel: 26.8″ |
| Rapid Traverse X Axis: 787 IPM |
| Rapid Traverse Z Axis: 945 IPM |
| Spindle: |
|---|
| Spindle Nose: A2-15 |
| Spindle Bore: 4.5″ |
| Spindle Speed: 15 – 2800 RPM |
| Spindle Motor: 35 hp |
| Turret: |
|---|
| Turret Capacity: 12 Stations |
| Turret Index Time: 0.15 Second |
| Tool Size: 2.4″ |
| Tailstock: |
|---|
| Tailstock Taper: MT-4 |
| Tailstock Body Travel: 20.5″ |
| Tailstock Quill Dia.: 3.7″ |
| Tailstock Quill Travel: 3.7″ |
| General: |
|---|
| Power: 55 kva, 220v / 3-Phase |
| Overall Dimensions: 148″ x 87″ x 90″ High |
| Weight: 12800 lbs |
